|
|
|
|
| |
|
|
|
|
|
Full Throttle Motorsports Sprint Car Supplies
Front Brake Fitting Protector
$10.98 Red Devil Style
This piece will protect the aluminum fitting on the left front brake caliper. They will deflect or stop any flying objects that may come in contact with the fitting, which will greatly reduce the chance of any damage to the fitting that could result in a costly break. Made from .050 thick stainless steel
Front Wing Strap - $14.95 per pair
These laser cut pieces are the top of the line in front wing straps.
Gauge Mounting Kits
$ 19.95
This mounting kit allows the user to mount a single gauge in each corner of the dash, or the double mounting kit allows both gauges to be mounted next to each other on the same plate, allowing for a quick change of both gauges. Includes laser cut mounting plate and special Dzus fastener washer.
Header Guards - $35.50 pr.
This set of header guards may be the last set that you will ever need to buy. They will protect your headers from flying debris that could dent or even completely pinch off one of your pipes resulting in lost horsepower or engine damage. Made from .080 Aluminum and available powder coated or in polished finishes.
Head Rest - $150.00
This may be the nicest head rest on the market. It is cut from .125 5052 aluminum, then TIG welded so it is extremely light weight but strong. Its curved design supports the helmet the entire length, not just at one point, like the competitors head rests. The mounting plate has 4 pre-drilled holes to make mounting a quick and easy task. Available powder coated or polished. Scroll over image to see the head rest mounted on the car.
Heel Risers - $ 16.95
These lightweight aluminum heel risers are available in 2different sizes, 1.25" & 1.5". Mounts to the floorboard using either pop-rivits or bolts through the 4 pre-drilled holes. Made from .032 Aluminum to keep weight to a minimum.
Rock Screen - $ 55.95
These rock guards are laser cut from think steel to ensure the most strength and protection available. Only 2 cross braces at the top and bottom allow for a nearly unobstructed view from the cockpit, while still providing the driver protection from any unwanted debris. Mounts using either Zeus fasteners or tie straps. Scroll over picture to see the rock guard mounted on the car.
Steering Gear Mount - $ 24.99
This lightweight piece offers a single mounting hole design, while still positively locating the steering gear. The range of holes offers the driver a large range of adjustments in mounting the steering gear. It also features a side tab to mount the fuel shut off valve. This keeps the valve out of the way of the driver, and allows the driver to activate the quick release and close the fuel shut off valve with very little movement. Made from .125 6061 Aluminum.
Sun Visor - $ 12.00
This sun visor mounts using the same hole locations as the rock screen, allowing the sun visor to be secured directly over the rock screen without having to add any extra tabs or use any extra fasteners. Available powder coated or in a polished finish.
Tach Mounting Kits - $19.95
This mounting kit allows the user to mount the tach in the dash on a quick release plate, to ease in those motor changes where time is of the essence. Two different styles allow the tach to be mounted from either the front or the back, based on the users preference.
Throttle Return Spring Bracket - $3.00
This bracket bolts into the existing hole in most injectors, and has a radius cut into the end to fit tightly up against the stacks. This gives a positive location for the throttle return spring to be hooked to, so the likely hood of a stuck throttle is greatly reduced.
35# maxim/eagle Weight Kit - $ 109.95
This weight kit bolts directly to the frame, right at the X brace in the front of the engine compartment. It will still allow the frame to flex, so handeling will not be comprimised, and if installed properly, it will not fall off the car.
1/4" steel Winters rear end wrench - $ 18.00
Muffler Flange Kit - $ 43.95
Includes 2 Flanges and 1 Stainless Steel Clamp. Makes Changing mufflers a snap, and eliminates the need to carry spare sets of headers in the trailer.
Aluminium Knee Guard - $64.95